STEEL BARS

  • Bright bars
  • Hot rolled and forged steel
  • Stainless steel bars

Cold drawn, ground, peeled and hot rolled peeled bars according to standards EN 10277 / EN 10278 (or comparable standards), with various heat treatments (annealed, normalized, quenched and tempered, …).

Offered diameters:

  • Round bars: 2 – 200 mm
  • Hexagonal bars: 4 – 100 mm
  • Square bars: 4 – 100 mm
  • Flat bars: 5 x 4 mm – 250 x 20 mm mm
  • Special profiles and shapes (on request)
  • Bar’s length: L = 2.000 – 8.000 mm (or on request)
  • Tolerance: h6, h7, h8, h9, h11, k11, k13, g6, g9, f7, …. (or on request)

Steel according to standards EN 10060 (DIN 7527-6) / EN 10025-2 EN10060 / EN 10084, EN 10060 / EN 10083, EN 10059 / EN 10083, EN 10058 / EN 10083 (or according to comparable standards).

According to assortment of our suppliers we present basic groups of hot rolled and forged steel based on their purpose:

  • Round hot rolled or forged structural steel according to EN 10060 (DIN 7527-6) / EN 10025-2m
  • Round hot rolled or forged case hardening steel according to EN 10060 (DIN 7527-6) / EN10084
  • Round hot rolled or forged steel for quenching and tempering according to EN 10060 (DIN 7527-6) / EN10083-2, 10083-3

Additional options: turned and pre-turned steel surface and various heat treatments (annealed, normalized, quenched and tempered, …).

Offered diameters:

  • Round bars: 20 – 800 mm
  • Square bars: 20 – 400 mm
  • Bar’s length: L = 2.000 – 12.000 mm (or on request)

For square and flat bars there are various options for radius and round-edged corners according to EN 10058, EN 10092 or on request. We offer also hot rolled bars with peeled surface in tolerance H11 or H13. All steel has EU origin.

Stainless steel according to standards EN 10060 / EN 10083, EN 10278 / EN100 83, EN 10058 / EN 10088, EN 10278 / EN 10088 (or according to comparable standards) with various heat treatments (annealed, normalized, quenched and tempered, …).

Offered diameters:

  • Round bars: 3 – 300 mm
  • Hexagonal bars: 4 – 100 mm
  • Square bars: 4 – 100 mm
  • Flat bars: 5 x 4 mm – 250 x 20 mm
  • Bar’s length: L = 3.000 – 6.000 mm (or on request)
  • Tolerance: h9, h11, k11, k13, …. (or on request)